Edge CTS Guia do Utilizador descarregar pdf (Página 8)

Edge Products ______________________________________GM Juice-Attitude CS/CTS

Supplied Items:

1. Edge Juice Module

2. Harness cable set

3. Depending on your vehicle year, the accessory package will include Velcro

mounting strips, wire ties and leaded fuse links.

4. EGT Thermocouple Sensor Probe

Required Tools:

1. 21/64" (5/16" optional) Drill bit and Power Drill (for EGT installation)

2. 1/8" (NPT) National Pipe Tapered Tap and T-Handle/Wrench (for EGT installation)

3. 9/16, 5/8 and 5/16" (or 8mm wrench)

4. Phillips Screwdriver

Mounting the Juice Module

Notice: Use caution when inserting connector bodies. If the connector does not slide

smoothly, remove the connector, inspect the pins, and retry installation. Pull on the

connectors, not the wires, when disconnecting the engine or Juice harnesses.

The Edge Power Juice Module can mount on top of or to the side of the black plastic fuse

box cover located on the driver’s side fender. Adhere the module using the supplied Velcro,

allowing enough harness movement for removal of the box cover.

Select your year and model from the following examples to aid in installation of the

harness:

2001-2005 GMC Duramax 6.6L LB7 & LLY

The following picture shows the Edge Power Juice Module with the harness cable.

Disconnect both stock engine harness connectors by squeezing the ears on the backside of

the connector and rotating the gray lever.

These two

connectors are

used to

connect the

EGT.

This cable is

where the

Edge CS/CTS

Attitude cable

gets connects.

Edge Juice

Module

The “ T” connections

are connected to the

Main Engine Harness

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 27 28

Chrisfoomo 26 Apr 2024 | 22:39:06

Hello, im noob :)

Edge CTS Guia do Utilizador Página 8